Abbey - Shallow Injector

The abbey disc injector is designed to spread slurry precisely onto grassland. The injector is fitted with cast iron discs and spreads with ranges from 4 meters to 6 meters according to model.

 
Slurry is injected into the ground at 250mm intervals via the sharpened edged cutting disc which makes a neat and precise groove; the slurry is then placed into the groove at depths ranging from 30mm to 80mm according to the pressure setting and ground conditions. The slurry injector is a vertical folding machine and is fully galvanised to protect against corrosion and can be either tractor or tanker mounted. The injector operates with steering spring loaded legs which allow it to steer or ride over obstacles.

Standard injector frame is build for a 6M machine. However to reduce horse power requirement and cost we sell it as a 4M. If the customer feels he can go bigger, extensions can be bolted on to each end of the boom making it a 5M or 6M machine.

Key Points

Low ammonia emissions
Reduced Odour
Reduced nitrogen loss
Improved fertiliser value
Even application across the width of machine
Reduced smearing of grass and cattle will graze on field afterwards
Slurry utilisation of up to 75%-80% compared to 15% with conventional splash plate
Fully galvanised
50mm reinforced hose
ExaCut Distributor (Self Adjusting & Sharpening)
Auto reverse function in distributor
Injector Disc’s are 400mm in diameter
Disc’s self steer
Self levelling boom to adjust to the ground contours using 4 point linkage
One model fits all

Share this article